Raspberry PI Boards And Display Accessories

Product Details:

This lovely little starter kit includes everything you need to get going right out of the box! The microSD card is even pre-imaged with the latest NOOBs so it'll boot up right away. The Raspberry Pi 3 Model B is the third generation Raspberry Pi with a 1.2GHz quad-core processor, 1GB of RAM, WiFi, and Bluetooth!

Kit Contents:

• 1x Raspberry Pi 3
• 1x Ethernet Patch Cable
• 1x Analog Audio/Video Cable
• 1x HDMI Cable
• 1x 8GB MicroSD card(with NOOBS image)
• 1x Micro USB cable
• 1x Raspberry Pi 2 Case
• 1x Power adaptor 5V, 1A

Product Details:

The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range, boasting a 64-bit quad core processor running at 1.4GHz, dual-band 2.4GHz and 5GHz wireless LAN, Bluetooth 4.2/BLE, faster Ethernet, and PoE capability via a separate PoE HAT The dual-band wireless LAN comes with modular compliance certification, allowing the board to be designed into end products with significantly reduced wireless LAN compliance testing, improving both cost and time to market. The Raspberry Pi 3 Model B+ maintains the same mechanical footprint as both the Raspberry Pi 2 Model B and the Raspberry Pi 3 Model B.

Product Details:

3.7 inch Resistive Touch Screen TFT LCD for Raspberry Pi is an ideal alternative solution for HDMI monitor. It supports any revision of Raspberry Pi and it can be directly plugged on to the RPi board, combined with the portable power this module is a convenient Men-Machine interface for Raspberry Pi.

Specification:

• Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3

Product Details:

This is a Mini Real-Time Clock module, it design for Raspberry Pi, but it also can be used to Arduino. Pluging it into Raspberry Pi GPIO interface, and all is ok. This is the easiest way to keep it in time.  

Features:

• Smaller
• Work in 3.3V and 5V
• Supported Raspberry Pi and Arduino

Specification:

• DS3231 RTC IC
• Self-adjust 3.3V and 5V

Product Details:

The secret sauce of Raspberry Pi Model B+ that makes this computer so small and powerful is the Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS with floating point, running at 700MHz, and a Videocore 4 GPU. The GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode and is capable of 1Gpixel/s, 1.5Gtexel/s or 24 GFLOPs of general purpose compute. What’s that all mean? It means that if you plug the Raspberry Pi into your HDTV, you could watch BluRay quality video, using H.264 at 40MBits/s. The new Model B+ also has a 10/100 Ethernet port so you can surf the web (or serve web pages) from right there on the Pi. The system volume no longer lives on an SD card but instead a microSD card, so it’s even easier to prepare, run and debug several different operating systems on the same hardware. This means no more large SD cards and no more deceptively difficult to handle adapters Most Linux distributions for the Pi will happily live on a 2GB microSD card but larger cards are supported. The Model B+’s Four built-in USB ports provide enough connectivity for a mouse, keyboard, or anything else that you feel the RPi needs, but if you want to add even more you can still use a USB hub. It is recommended that you use a powered hub so as not to overtax the on-board voltage regulator. Powering the Raspberry Pi is easy, just plug any USB power supply into the micro-USB port. There’s no power button so the Pi will begin to boot as soon as power is applied, to turn it off simply remove power. The four built-in USB ports can even output up to 1.2A enabling you to connect more power hungry USB devices (This does require a 2Amp micro USB Power Supply).

Product Details:

Raspberry Pi 2 is here to provide you with the same Pi as before but now with double the ram and a much faster processor. The credit-card sized computer is capable of many of the things that your desktop PC does, like spreadsheets, word-processing and playing high-definition video and games. It can run several flavors of Linux.

Product Details:

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processor speed, multimedia performance, memory, and connectivity compared to the prior-generation Raspberry Pi 3 Model B+, while retaining backwards compatibility and similar power consumption. For the end user, Raspberry Pi 4 Model B provides desktop performance comparable to entry-level x86 PC systems.

Product Details:

Raspberry Pi High - Precision AD / DA Expansion:

• Board helps you overcome the Raspberry Pi dilemma of not having GPIOs with AD/DA functionality. This expansion board offers an eight channel 24bit high precision ADC with the help of ADS1256 and a two channel 16bit high precision DAC – DAC8532.

Raspberry Pi Expansion Board Features:

• Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate
• Onboard DAC8532, 2ch 16bit high-precision DAC
• Onboard input interface via pin-headers, for connecting analog signal
• Pinout compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules
• Onboard input/output interface via screw terminals, for connecting analog/digital signal
• Features AD/DA detect circuit, easy for signal demonstration

Supported Raspberry Pi Models:

• Raspberry Pi 1 Model A+
• Raspberry Pi 1 Model B+
• Raspberry Pi 2 Model B
• Raspberry Pi 3 Model B

Raspberry Pi Expansion Board Package:

• 1x High-Precision AD/DA Board
• 1x RPi screws pack (2pcs)

Product Details:

Protect your Raspberry Pi 3, Pi 2 or model B+ with this white ABS Case, designed specifically for the Raspberry Pi making for a snug fit and meaning that the case has openings to allow access to the many expansion ports in the board. The case is a two-piece injection-molded ABS enclosure that snaps together around the Raspberry Pi 3/2/B+.

Features:

• Two piece construction, Base & Cover
• Base incorporates side clips to hold the Raspberry Pi board
• Cover can easily be removed without the need to unplug any cables
• Raspberry Pi B+ can be operated with or without the cover on, giving access to the GPIO and JTAG connectors.
• Vented base and cover to allow through air flow

Package includes:

• 1x Abs Case For Raspberry Pi 3/2/B+ (Clear)

Product Details:

It is designed to be customized GPIO multifunction expansion board for the Raspberry Pi. It is easy for the users to connect enrich peripheral modules to Raspberry Pi board such as 4-Digit Display module, Serial Bluetooth module, Serial MP3 module.etc.

Features:

• Compatibility: compatible with Raspberry Pi 2 model B and Raspberry Pi 3 model B
• Lead out all the pins and the pin pitch is 2.54mm
• Screwless terminals lead out 24 pins, wiring is very convenient.

Product Details:

Raspberry Pi NoIR Infrared Camera Board (8MP, 1080p)

• No IR filter great for low light conditions
• Fully compatible with both the Model A and Model B Raspberry Pi
• 1.4µm X 1.4µm pixel with OmniBSI technology for high performance
• Optical size of 1/4inch
• Automatic image control functions
• Programmable controls for frame rate
• 32bytes of embedded one time programmable (OTP) memory
• Digital video port (DVP) parallel output interface

Product Details:

The Raspberry Pi Camera Module

• 8 megapixel camera capable of taking photographs of 3280x2464 pixels
• Capture video at 1080p30, 720p60 and 640x480p90 resolutions
• All software is supported within the latest version of Raspbian Operating System

Applications:

• CCTV security camera, motion detection, time lapse photography.

Product Details:

This 5" Resistive Touch Screen LCD enhances the UI experience in any project. It supports various systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black etc. The built in HDMI interface enables the display to work as computer monitor just like any other HDMI screen.

Features:

• 800x480 High resolution, resistive touch panel
• Supports Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption
• Compatible with Raspberry Pi B,Raspberry Pi B+,Raspberry Pi 2 & Raspberry Pi 3

Package Includes:

• 1x 5inch HDMI LCD (B)
• 1x HDMI cable
• 1x Touch pen
• 1x USB type A plug to micro B plug cable
• 1x RPi LCD screws pack (4pcs)
• 1x DVD

Product Details:

7 inch Capacitive Touch Screen for Raspberry Pi (1024x600):

• This 7" Capacitive Touch Screen LCD enhances the UI experience in any project. It supports various systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black etc. The built in HDMI interface enables the display to work as computer monitor just like any other HDMI screen.

Features:

• 1024x600 high resolution
• Capacitive touch control
• Supports Raspberry Pi (Including Pi 3), comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption

Product Details:

This easy to assemble case,manufactured from high quality ABS plastic, will provide your Raspberry Pi 3, Pi 2 and model B+ quite good cover. This case comes in two piece construction, base and cover, with a smooth ABS plastic finish in black color.  This version's frosted - so you can admire your Pi in glossy black case.  There's slots in the top for Camera and Display cables, notches in the side to view the power and activity LEDs, and a slot in the side for GPIO cables so you can easily build out your Pi with accessories.

Features:

• Compatible with Latest Version Raspberry Pi 3, Pi 2 and Model B+
• Two piece construction, Base & Cover
• Base incorporates side clips to hold the Raspberry Pi board
• Cover can easily be removed without the need to unplug any cables
• Raspberry Pi can be operated with or without the cover on, giving access to the GPIO and JTAG connectors.
• Vented base and cover to allow through air flow

Package includes:

• 1x Abs Case For Raspberry Pi 3/2/B+ (Black)
• 4x Mounting screws
• 1x Blown-sponge

Additional Information:

• Item Code: 010019

Product Details:

This 3.3" Resistive Touch Screen LCD enhances the UI experience in any project. It supports various systems such as Raspberry Pi, Banana Pi, Banana Pro, BeagleBone Black etc. The built in HDMI interface enables the display to work as computer monitor just like any other HDMI screen.

Features:

• 800x480 High resolution, resistive touch panel
• Supports Raspberry Pi, comes with Raspbian driver (works with your Raspbian directly), and Ubuntu image
• Supports Banana Pi / Banana Pro, comes with Lubuntu, Raspbian images
• Supports BB Black, comes with Angstrom image
• HDMI interface for displaying, USB interface for touch control
• Back light control to lower power consumption
• Compatible with Raspberry Pi B, Raspberry Pi B+, Raspberry Pi 2 & Raspberry Pi 3

Product Details:

HDMI (High-Definition Multimedia Interface): Is a compact audio/video interface for transferring uncompressed video data and compressed/uncompressed digital audio data from a HDMI-compliant device ("the source device") to a compatible computer monitor, video projector, digital television, or digital audio device. HDMI cable connects two HDMI devices together with this basic HDMI cable. It has nice molded grips for easy installation, and is a 1.5 meter long (about 5 feet).

Features:

• Compatible with Raspberry Pi.
• Also supports normal HDMI cables functions.
• Available in attractive colors.
• Good quality material.
• Highly durable.
• Ferrite Bead suppresses high frequency noise.