Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25, humidity<75%RH with nominal input voltage and rated output load;
The room temperature derating of 5???/1000m is needed for operating altitude greater than 2000m;
All index testing methods in this datasheet are based on our company corporate standards;
In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability;
We can provide product customization service, please contact our technicians directly for specific information;
Products are related to laws and regulations: see "Features" and "EMC";
The out case needs to be connected to PE ( )of system when the terminal equipment in operating;
Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units.
Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25???, humidity<75%RH with nominal input voltage and rated output load;
The room temperature derating of 5???/1000m is needed for operating altitude greater than 2000m;
All index testing methods in this datasheet are based on our company corporate standards;
In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability;
We can provide product customization service, please contact our technicians directly for specific information;
Products are related to laws and regulations: see "Features" and "EMC";
The out case needs to be connected to PE( )of system when the terminal equipment in operating;
Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units.
Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25???, humidity<75%RH with nominal input voltage and rated output load;
The room temperature derating of 5???/1000m is needed for operating altitude greater than 2000m;
All index testing methods in this datasheet are based on our company corporate standards;
In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability;
We can provide product customization service, please contact our technicians directly for specific information;
Products are related to laws and regulations: see "Features" and "EMC";
The out case needs to be connected to PE of system when the terminal equipment in operating;
Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units.
Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25???, humidity<75%RH with nominal input voltage and rated output load;
The ambient temperature derating of 5???/1000m is needed for operating altitude greater than 2000m;
All index testing methods in this datasheet are based on our company corporate standards;
In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product performance and reliability;
We can provide product customization service, please contact our technicians directly for specific information;
Products are related to laws and regulations: see "Features" and "EMC";
The out case needs to be connected to PE( ) of system when the terminal equipment in operating;
Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by qualified units.
The power supply is considered a component which will be installed into a final equipment. All EMC tests should be confirmed with the final equipment. Please consult our FAE for EMC test operation instructions.
One magnetic bead(nickel-zinc ferrite)should be coupled with the output load line during CE/RE testing;
This power supply does not meet the harmonic current requirements specified in EN61000-3-2.
Please do not use this power supply under the following conditions:
The terminal equipment is used in the European Union.
Supporting terminals are connected to a public power grid with 220VAC or a higher voltage that comply with the requirements of EN61000-3-2.
The power supply is installed in terminal equipment with average or continuous input power greater than 75W, and the power supply belongs to a part of lighting system.
Exception: The power supply used in the following terminal equipment does not need to meet EN61000-3-2.
Professional equipment with a total rated input power greater than 1000W.
Symmetrically controlled heating element with a rated power less than or equal to 200W.
LMF320-20Bxx series are one of Mornsun’s enclosed AC-DC switching power supply. It features universal AC input and at the same timeaccepts DC input voltage, cost-effective, built-in active PFC function, high efficiency and high reliability. These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/ EN55032, IEC62368, UL62368, EN62368, EN60335, GB4943 standards and they arewidely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc.
Selectable AC input range: 90 ~ 132VAC/180 ~ 264VAC DC input range: 240 ~ 373VDC(Switch in position of 230) Ultra low standby power consumption: < 0.75W @230VAC
Universal 85-264VAC or 120-370VDCinput voltage Accepts AC or DC input (dual-use of sameterminal) Plastic Dinrail mount High I/O isolation test voltage up to 4000VAC
LM150-20Bxx series is one of Mornsun’s enclosed AC-DC switching power supply & LRS150 series is one of meanwell's enclosed AC-DC Switching Power Supply. It features universal AC input and at the same time accepts DC input voltage, cost-effective, low no load power consumption, high efficiency, high reliability and double or reinforced insulation. These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/EN55032, UL/EN/IEC62368, EN60335, GB4943 standards. They are widely used in areas of industrial, LED, street light control, electricity, security, telecommunications, smart home etc.
Request Callback
Yes! I am Interested
LM100-10Dxx Series Mornsun AC-DC Converter with Dual Output Voltage
LM100-10Dxx series of power converter design features two isolated output versions, which can independently supply two different loads in the system that need to be isolated from each other. The products can be used in harsh working environments with an ambient temperature range from -30 to +70 Deg C, without the need of a fan for further heat dissipation. In addition, the converters EMC immunity performance meetsthe requirements of IEC61000 standard and meet emission standard CISPR32/EN55032, class B without any external components, thus providing excellent EMC protection. The products also meet IEC/EN/UL62368, EN60335, GB4943 safety standards. The converters integrate a variety of protection features and offer a high-performance to low-cost ratio providing the best power solution for a variety of industries such as industrial control equipment, instrumentation and smart home and building equipment application.
Request Callback
Yes! I am Interested
LM100-10CXX Series Mornsun AC-DC Converter With Triple Output Voltage
This LMXX-10Cxx series of power converter design features 3 output versions, which can independently supply 3 different loads in the system. The products can be used in harsh working environments with an ambient temperature range from -30 to +70 Deg C, without the need of a fan for further heat dissipation. In addition, the converters EMC immunity performance meets the requirements of IEC61000 standard and meetemission standard CISPR32/EN55032, class B without any external components, thus providing excellent EMC protection. The products also meet IEC/EN/UL62368, EN60335, GB4943 safety standards. The converters integrate a variety of protection features and offer a high-performance to low-cost ratio providing the best power solution for a variety of industries such as industrial control equipment, instrumentation and smart home and building equipment application.
The 10W ultra-small series power supply module is a small volume, high efficiency power module designedfor customers by Hi-Link. It has the advantage of global input voltage range, low temperature rise, low powerconsumption, high efficiency, high reliability, high security isolation etc. and has been widely used in smart home, automation control, communication equipment, instruments and other industries.
The 3W ultra-small series power supply module is a small volume, high efficiency power module designedfor customers by Hi-Link. It has the advantage of global input voltage range, low temperature rise, low powerconsumption, high efficiency, high reliability, high security isolation etc. and has been widely used in smart home, automation control, communication equipment, instruments and other industries.
2W ultra-small series of power module is a small volume, high efficiency module power supply designed byHi-Link Electronics. With the global input voltage range, low temperature rise, low power consumption, highefficiency, high reliability, high security isolation and so on. Has been widely used in smart home, automation,communications equipment, instrumentation and other industries.
The A7406A is a high frequency (1.8MHz) step-down switching regulator with integrated internal high-side high voltage power MOSFET. It provides single 0.6A(or less) highly efficient output with current mode control for fast loop response. The wide input range(4.2V to 40V) accommodates a variety of step-down applications. Low shutdown mode quiescent current allows use in battery-powered applications.
LD30-23BxxR2 series AC-DC converters is one of Mornsun’s new generation compact size power converters. It features wide ACinput andatthe same time accepts DC input voltage, low power consumption, high efficiency, high reliability, reinforced isolation
LI100-20BxxPR2 is Mornsun’s AC-DC series featuring a cost-effective, energy efficient solution for standard DIN-rail mounting. The products offer a high level of stability and immunity to noise, compliant with international IEC62368 standards for EMC are safety approved to IEC/EN61000-4, CISPR32, EN55032, UL62368, IEC62368 and EN62368. These light weight AC-DC converters also have an extremely compact design for space saving and are ideal for applications such as industrial control equipment machinery and all kinds of applications in aharsh environment.
Request Callback
Yes! I am Interested
LI120-20BxxR2 Series Mornsun DIN-Rail AC-DC Converter
LI120-20BxxR2 is Mornsun AC-DC converter series featuring a cost-effective, energy efficient green power supply solution for standard DIN-rail mounting. The products offer a high level of stability and immunity to noise for industrial control equipment, machinery, and other industrial equipment in a variety of harsh environments. These light weight AC-DC converters have an extremely compact design and the standard rail (35mm) installation for space saving. With good EMC performance, compliant with international IEC/EN/UL62368, EN60335, GB4943 standards for EMC and safety.
Campus Component Private Limited 3rd Floor, Office No 308, Ackruti Chambers, Near Laxminarayan Theratre, Pune Satara Road Pune - 411037, Maharashtra, India