Bluetooth Chips And Modules

Product Details:

These small size Bluetooth TTL transceiver modules are designed for serial communication (SPP - serial port profile). It allows your target device to both send or receive TTL data via Bluetooth technology without connecting a serial cable to your computer. The modules with the HC 06 Bluetooth Module firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-06 is a commercial grade product.

Specifications:

• Built-in CSR company Bluetooth chip BC417143
• Bluetooth® Technology v2.0 + EDR
• TTL data transparent transfer between a host Bluetooth device
• Compatible with all Bluetooth adapters that support SPP
• Coverage up to 30 ft / 10 m
• Built in antenna
• Power input: +3.3VDC (bluetooth module)
• Can set the module control parameters and control commands via AT commands
• The maximum serial baud rate: 1382400 bps, support for hardware flow control transfer
• Provide seven input and output ports
• Connection/non-connection status indicators

Product Details:

THE BLE 5.0 is a Module with 512KB Flash/64KB RAM Mesh Topology Memory.

Product Details:

AB1611N Bluetooth Low Energy Module is an optimized single-chip solution which integrates baseband, radio, and flash memory for game controllers, mobile payments, and wearable device applications. It meets the Bluetooth Version 5.0 specification. The embedded 512KB flash is flexible and allows for custom software development, and support for nine AIOs allows for game controller applications.

Product Details:

HC serial Bluetooth products consist of Bluetooth serial interface module and Bluetooth adapter, such as: 

Industrial level:

• HC-03, HC-04(HC-04-M, HC-04-S) Civil level: HC-05, HC-06(HC-06-M, HC-06-S) HC-05-D, HC-06-D (with baseboard, for test and evaluation) 

Product Details:

HC 10 Bluetooth Chip  modules use CSR or TI CC254x or cypress chips, Master and slave roles in one, data transmission version and remote control version and PIO status acquisition version in one, Support the AT commands modify module parameters, Convenient and flexible.

Product Details:

We are among the prominent names in the industry, making available HC 05 Bluetooth Chip  for our venerable customers. The offered modules can be easily connected to mobile phones and computers with Bluetooth connectivity option. With their wide signal range and optimum performance, these transceivers are highly appreciated by the customers. These modules comprise of a breakout board that enables easy connectivity.

Features:

• A breakout board for easier connectivity
• Designed for 3.3v level ttl but will accept 5v level as well
• Built in antenna with a range of up to 30 feet (range is dependent on a lot of things such as any obstacles or walls in the way so it may vary)

Product Details:

The RN4677 is a fully certified Bluetooth version 4.0 (BR/EDR/LE) module, which enables the designers to easily add dual mode Bluetooth wireless capability to their products. Delivering local connectivity for the Internet of Things (IoT), the RN4677 bridges the product to Smart Phones and Tablets for convenient data transfer, control and access to cloud applications. This Bluetooth SIG certified module provides a complete wireless solution with Bluetooth stack onboard, integrated antenna, and worldwide radio certifications in a compact surface mount package, 22 x 12 x 2.4 mm. It supports GAP, SDP, SPP, and GATT profiles. Data is transferred over the Bluetooth link by sending/receiving data via transparent UART mode, making it easy to integrate with any processor or Microcontroller with a UART interface. Configuration is made easy using a ASCII commands via UART. Windows® based GUI, or PIC MCU configuration driver are also used to access configuration settings over UART.

Product Details:

These small size Bluetooth TTL transceiver modules are designed for serial communication (SPP - serial port profile). It allows your target device to both send or receive TTL data via Bluetooth technology without connecting a serial cable to your computer. The modules with the HC-05 firmware are the modules which are factory set to be Master or Slave modules. Master and slave mode cannot be switched from the factory setting. HC-05 is a commercial grade product. 

Product Details:

The most complete, most convenient, the most stable of bluetooth data transmission, remote control, PIO acquisition module - Master and slave role in one -Remote control without other MCU - The PIO data acquisition without.