|Dimension||0.960 in x 1.087 in|
We are proficient in the manufacturing and supplying of high quality ZIGBEE Module Transceiver. These modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
Supported Network Topologies: Point-to-point, Point-to-multipoint & Peer-to-peer
Number of Channels: (software selectable) 16 Direct Sequence Channels
Addressing Options: PAN ID, Channel and Addresses
Channel capacity: 16 Channels
Addressing: 65000 network address available for each channel
AT and API Command Modes for configuring module parameters
Extensive command set
Small form factor
|RF Data Rate||250 kbps|
|Dimension||66mm x 40mm x 12mm|
XBEE Base Baord USB Interfacing Board used to interface ZigBee wireless Module with Desktop or Laptop computer systems. User can use this Interfacing board to connect raw module of ZigBee to make communication between PC to PC, PC to Mechanical Assembly, PC to embedded and microcontroller based Circuits. User can also use this board to configure ZigBee (XBee) according to application. As ZigBee communicates through Serial Communication so other end of USB which is connected to PC, treated as COM port for Serial Communication. User can use any type of ZigBee module almost. It is provided with indication LEDs for ease.
|Data rate||250 kbps RF|
We are among the industry veterans, engaged in manufacturing and supplying Digi Zigbee modules to our treasured customers. The offered modules are embedded solutions that enable fast peer to peer and point to multipoint networking. These modules are useful for applications involving predictable communication timing and low latency. We make these modules available at standard market prices.
|Range||1 mile (1600m)|
Description: This is the XBee Pro 63mW Wire Antenna XBP24-BZ7WIT-004 module from Digi. The new Series 2B improves upon the power output and data protocol of the Pro Series2. Series 2B modules allow you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.
Series 2B modules use a different hardware configuration from the earlier models and while they will communicate with Series 2 XBee modules, they are not compatible with the outdated Series 2.5 Modules.
3.3V @ 295mA
250kbps Max data rate
63mW output (+17dBm)
1 mile (1600m) range
Fully FCC certified
6 10-bit ADC input pins
8 digital IO pins
Local or over-air configuration
AT or API command set
Note: Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.