Campus Component Pvt. Ltd.


Our Products










Home » Our Products » Gas Sensor

Gas Sensor

Prominent & Leading Manufacturer and Supplier from Pune, we offer Gas Sensor such as MQ2 General Combustible Gas Sensor, Flammable Gas and Smoke Sensor, MQ8 Hydrogen Sensor, MQ9 CO and Combustible Gas, MQ-4 Natural Gas Sensor, MQ5 LPG Gas Sensor and many more items.



MQ2 General Combustible Gas Sensor

MQ2 General Combustible Gas Sensor

MQ-2 Semiconductor Sensor for Combustible Gas
Sensitive material of MQ-2 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensor’s conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-2 gas sensor has high sensitivity to LPG, Propane and Hydrogen, also could be used to Methane and other combustible steam, it is with low cost and suitable for different application.

Character
*Good sensitivity to Combustible gas in wide range
* High sensitivity to LPG, Propane and Hydrogen
* Long life and low cost
* Simple drive circuit

Application
* Domestic gas leakage detector
* Industrial Combustible gas detector
* Portable gas detector






Flammable Gas and Smoke Sensor

Flammable Gas and Smoke Sensor

We are among the leading manufacturers and suppliers of Flammable Gas and Smoke Sensor in the industry. The offered sensors are characterized by a compact design and hassle free installation and maintenance. These sensors can effectively detect the presence of combustible gases in small or large concentrations and alert the area through their analog signals in a timely manner. Capable of functioning seamlessly under all kinds of temperature and environmental conditions, these sensors provide long term service to the customers.

Specifications:

  • Loop Voltage: ≤24V  DC
  • Heater Voltage: 5.0V±0.2V AC or DC





MQ8 Hydrogen Sensor

MQ8 Hydrogen Sensor

Introduction

This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. The sensor's output is an analog resistance. The drive circuit is very simple, all you need to do is power the heater coil with 5V, add a load resistance, and connect the output to an ADC.


Features:

•High sensitivity to Hydrogen (H2)
•Small sensitivity to alcohol, LPG,cooking fumes
•Stable and long life
•5V DC
•Operation Temperature: -10 to 70 degrees C
•Dimensions 16.8mm diameter
•Heater consumption: less than 750mW
•Requires heater voltage
•9.3 mm height without the pins






    MQ9 CO and Combustible Gas

    MQ9 CO and Combustible Gas

    MQ-9 Semiconductor Sensor for CO/Combustible Gas
    Sensitive material of MQ-9 gas sensor is SnO2,which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentration rising. When high temperature (heated by 5.0V), it detects Methane, Propane etc combustible gas and cleans the other gases adsorbed under low temperature. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-9 gas sensor has high sensitivity to Carbon Monoxide, Methane and LPG. The sensor could be used to detect different gases contains CO and combustible gases, it is with low cost and suitable for different application.

    Character
    * Good sensitivity to CO/Combustible gas
    * High sensitivity to Methane, Propane and CO
    * Long life and low cost
    * Simple drive circuit
    Application
    * Domestic gas leakage detector
    * Industrial gas detector
    * Portable gas detector






    MQ-4 Natural Gas Sensor

    MQ-4 Natural Gas Sensor

    MQ-4 Semiconductor Sensor for Natural Gas
    Sensitive material of MQ-4 gas sensor is SnO2, which with lower conductivity in clean air. When the target combustible gas exist, The sensor’s conductivity is more higher along with the gas concentrationrising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-4 gas sensor has high sensitivity to Methane, also to Propane and Butane. The sensor could be used to detect different combustible gas, especially Methane, it is with low cost and suitable for different application.

     

    Character
    * Good sensitivity to Combustible gas in wide range
    * High sensitivity to Natural gas
    * Long life and low cost
    * Simple drive circuit

    Application
    * Domestic gas leakage detector
    * Industrial Combustible gas detector
    * Portable gas detector






    MQ5 LPG Gas Sensor

    MQ5 LPG Gas Sensor

    Backed by our rich industry experience, we bring forth LPG Gas Sensor (Liquefied petroleum gas) for our treasured customers. Extensively utilized for the detection of Methane, Propane and Butane, and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible gas especially Methane, it is with low cost and suitable for different application. These sensors are highly demanded in the market. With their quick response to the instance of leakage, these sensors enhance the safety. Easy to install and power efficient, these sensors have earned the recognition of a large number of customers.


    Character

        • Good sensitivity to Combustible gas in wide range
        • High sensitivity to Methane, Butane and Propane
        • Long life and low cost
        • Simple drive circuit

    Specifications:

        •Detection Range: 100 - 10,000 ppm iso-butane propane
        •Fast Response Time: <10s
        •Heater Voltage: 5.0V
        •Dimensions: 18mm Diameter, 17mm High excluding pins, Pins - 6mm High

    Applications:

        •Gas leak detection system
        •Fire/Safety detection system
        •Gas leak alarm
        •Gas detector






    MQ7 Carbon Monoxide Sensor

    MQ7 Carbon Monoxide Sensor

    MQ-7 Semiconductor Sensor for Carbon Monoxide
    Sensitive material of MQ-7 gas sensor is SnO2, which with lower conductivity in clean air. It make detection by method of cycle high and low temperature, and detect CO when low temperature (heated by 1.5V). The sensor’s conductivity is more higher along with the gas concentrati on rising. When high temperature (heated by 5.0V), it cleans the other gases adsorbed under low temperature. Please use simple electrocircuit, Convert change of conductivity to correspond out put signal of gas concentration. MQ-7 gas sensor has high sensitivity to Carbon Monoxide. The sensor could be used to detect different gases contains CO, it is with low cost and suitable for different application.

    Character
        • Good sensitivity to carbon monoxide
        • Long life and low cost
        • Simple drive circuit

    Specifications:
        •Detection Range: 100 - 10,000 ppm carbon monoxide
        •Fast Response Time: <10s
        •Heater Voltage: 5.0V
        •Dimensions: 18mm Diameter, 17mm High excluding pins, Pins - 6mm High

    Applications:
        •Toxic gas (CO) leak detection system
        •Fire/Safety detection system
        •CO leak alarm






    MQ135 Air Quality Sensor

    MQ135 Air Quality Sensor

    We are among the pioneers in the industry, engaged in manufacturing and supplying Air Quality Sensor to our revered customers. The offered sensors are characterized by a wide detection range and high sensitivity, thus delivering optimal performance to the customers. These sensors are widely used for determining the extent of pollution of the air for both domestic and industrial settings.

    Features:


    • High Sensitivity
    • High sensitivity to Ammonia, Sulfide and Benze
    • Stable and Long Life

     

    Specifications:

     

    • Detection Range: 10 - 300 ppm NH3, 10 - 1000 ppm
    • Heater Voltage: 5.0V
    • Dimensions: 18mm Diameter, 17mm High excluding
    • Long life and low cost

    Applications:


    • Domestic air pollution detector
    • Industrial air pollution detector
    • Portable air pollution detector






    MQ303A Alcohol Sensor

    MQ303A   Alcohol Sensor

    The MQ-303A is a tin dioxide semiconductor gas sensor which has a high sensitivity to alcohol with quick response speed. This model is suitable for alcohol detection such as portable breath alcohol checker or ignition locking system in automobiles.

    Features:

    • High sensitivity
    • Fast response and resume
    • Long life and low cost
    • Mini size
    Specifications:
    • Operating Voltage: 3V DC
    • Operating Current: 120mA
    • Power: 360mW






    MQ3 Alcohol Sensor

    MQ3 Alcohol Sensor

    MQ-3 Semiconductor Sensor for Alcohol
    Sensitive material of MQ-3 gas sensor is SnO2, which with lower conductivity in clean air. When the target alcohol gas exist, The sensor’s conductivity is more higher along with the gas concentration rising. Please use simple electrocircuit, Convert change of conductivity to correspond output signal of gas concentration. MQ-3 gas sensor has high sensitivity to Alcohol, and has good resistance to disturb of gasoline, smoke and vapor. The sensor could be used to detect alcohol with different concentration, it is with low cost and suitable for different application.

    Character
    * Good sensitivity to alcohol gas
    * Long life and low cost
    * Simple drive circuit

    Application
    * Vehicel alcohol detector
    * Portable alcohol detector






    Line Array Sensor

    Line Array Sensor

    We are among the acclaimed names in the industry, making available Line Array Sensor for our treasured customers. The offered sensors are meticulously designed by domain experts, in strict compliance with industry standards. These modules are meant to ease line tracing functionality with each sensor capable of being tuned separately. Customers can avail these line array sensor modules at market leading prices.

    Features:

    • Matrix Circuitry
    • Excellent temperature stability
    • Low power consumption





    Passive IR Sensor

    Passive IR Sensor



    Light Dependent Resistor Sensor

    Light Dependent Resistor Sensor


    Item Code:LDR


    Opto Interrupter Sensor

    Opto Interrupter Sensor







    Contact Us
    Campus Component Pvt. Ltd.
    Mr. Akhilesh .
    Office No. 308, 3rd Floor, Akruti Chambers, Near Laxmi Narayan Theater, Swargate
    Pune - 411037, Maharashtra, India

    Contact via E-mail


    Home  |  Profile  |  Our Products  |  Trade Offers (20)   |  Site Map  |  Contact Us  |   Mobile Site

    Member IndiaMART.com © Campus Component Pvt. Ltd.. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited