Swargate, Pune, Maharashtra
Send E-mail
Send SMS
Home»Our Products»

Arduino Shield

Leading Exporter and Distributor from Pune, our product range includes Arduino Shield such as 2.4" TFT LCD Shield Display Module for Arduino U, Arduino LCD Keypad Shield, Arduino 3.2" TFT LCD Touch Shield, DC Motor/Stepper/Servo Shield for Arduino, Prototype Shield V3 Mini Bread Board For Arduino Mega, USB Host Shield Electronic Boards and many more items.

REQUEST CALLBACK
Approx. Rs 500 / Pcs
Get Best Quote

Overview

Arduino 2.4" TFT LCD Touch shield is an Arduino UNO/ Mega

compatible multicolored TFT display with touch-screen and

SD card socket. It is available in an Arduino shield compatible

pinout for attachment. The TFT driver is based

on S6D112 with 8bit data and 4bit control interface.

The Arduino 2.4" TFT LCD Touch shield can work with both

3.3V and 5V, so it can dispaly ont UNO382 and Simplecortex

as well.

Features

· Arduino UNO Rev3 / Mega Shield compatible footprint

· Arduino library UTFT support

· TFTResolution : 240 x 320 pixels

· Size : 2.4"

· Colors : 262K

· Backlight : LED

· Driver IC: S6D112


Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 250 / Piece
Get Best Quote

This is a 16x2 LCD and Keypad shield for Arduino Uno, Diecimila, Duemilanove and Freeduino boards. to provide a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 5 keys — select, up, right, down, left and reset. To save the digital IO pins, the keypad interface uses only one ADC channel. The key value is read through a 5 stage voltage divider.

Specifications:

  • Operating Voltage: 5V
  • Push buttons: 6

Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 350 / Piece
Get Best Quote

Overview

Arduino 3.2" TFT LCD Touch shield is an Arduino Mega

compatible multicolored TFT display with touch-screen

and SD card socket. It is available in an Arduino MEGA

shield compatible pinout for attachment. The TFT driver

is based on SSD1289 with 8bit data and 4bit control

interface.

The Arduino 3.2" TFT LCD Touch shield can work with

both 3.3V and 5V, so it can dispaly on Chipkit MAX32

as well.

Features

· Arduino Mega Shield compatible footprint

· Arduino library UTFT support

· TFTResolution : 240 x 320 pixels

· Size : 3.2"

· Colors : 262K

· Backlight : LED

 

· Driver IC: SSD1289



Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 299 / Piece
Get Best Quote

Description:

This Arduino compatible motor Driver shield is a full-featured products that it can be used to drive 4 DC motors or two 4-wire stepper and two 5V 'hobby' servo. It drive the DC motor and stepper with the L293D, and it drive the servo with Arduino's pin9 and pin10.

Features:
 

  • 2 x L293D Motor Control Chips
  • Reduced control pins needed through 8-stage serial shift registers
  • Drive part of the operating current Io: 1.2A (0.6A per bridge)
  • External power connection via a screw-terminal block
  • Screw-Terminal blocks for connection to motors
  • Total of 4 H-Bridges for controlling 4 DC motors or 2 Stepper motors
  • 2 x Server ports for controlling RC Hobby Servos
  • The logic control voltage Vss: 4.5~5.5V
  • Motor Supply Voltage: 4.5 ~ 12V


Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 399 / Piece
Get Best Quote
Description

The board can not only receive MEGA seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment, board integrated power indicator and status lights, and reset buttons, easy to learn MEGA preferred prototype controller expansion board.

Technical Specifications

  •  Arduino MEGA / MEGA2560 ProtoShield prototype expansion board with Immersion Gold PCB processing technology, motherboards, small gold square pad spacing, welding components easier.
  • SOP28 SMD component package to be more handy Arduino electronics enthusiasts will not be directly insert bound components.
  • Full Compatible with Arduino Mega ATmega1280 / MEGA2560.
  • The board can receive Arduino MEGA / MEGA2560 seamless plug controller, directly soldered to the above components to complete a variety of prototype circuit, you can paste Mini bread board, through the 7-color jumper to complete a variety of circuit experiment , board integrated power indicator and status lights, and reset buttons, easy to learn Arduino MEGA / MEGA2560 preferred prototype controller expansion board.
  • High sensitivity with integrated low-noise RF input amplifier.


Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 999 / Piece
Get Best Quote
Description:
The USB Host Shield contains all of the digital logic and analog circuit necessary to implement a full-speed USB peripheral/host controller with Arduino. User can use the Arduino to connect and control any USB slave device easily.

Features 
  • USB 2.0 Full Speed compatible
  • 3.3/5V operation level compatible
  • All GPIOx pins break-out
  • USB Host 5V/500mA supply for USB protocol
Specifications 
Operating Voltage5V
USB ControllerMAX3421E
Max Current500mA when Arduino is powered by a suitable power supply connected to the Arduino power jack
Max Current400mA when Arduino is powered by its USB port


Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 599 / Piece
Get Best Quote

Arduino Ethernet Shield W5100

Specification:
 

  • With this Ethernet Shield, your Arduino board can be used to connect to internet.
  • Can be used as server or client.
  • Size: 7cm x 5.4cm x 2.4cm - 2.76inch x 2.12inch x 0.94inch.
  • MAC address: 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED }
  • Directly plug puzzle board, no soldering required.
  • Controller: W5100.
  • This is the latest version of the Ethernet Shield.
  • This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online.
  • It is compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library.
  • The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP.
  • It supports up to four simultaneous socket connections.
  • Use the Ethernet library to write sketches which connect to the internet using the shield.
  • It is directly supported by Arduino official Ethernet Library.
  • It adds a micro-SD card slot, which can be used to store files for serving over the network.
  • Fits all version of Arduino Main board,2009,UNO, mega 1280, mega 2560.




Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 449 / Piece
Get Best Quote
Features:
  1. SD card interface works with FAT16 or FAT32 formatted cards.
  2. 3.3V level shifter circuitry prevents damage to your SD card.
  3. Real time clock (RTC) keeps the time going even when the Arduino is unplugged.
  4. Included libraries and example code for both SD and RTC, means you can get going quickly.
  5. Prototyping area for soldering connectors, circuitry or sensors.
  6. Onboard 3.3V regulator is both a reliable reference voltage and also reliably runs SD cards that require a lot of power to run.
  7. Works with Arduino UNO, Duemilanove, Diecimila, Leonardo or ADK/Mega R3 or higher.
  8. ADK/Mega R2 or lower are not supported.

Specification:
  1. Size: 68 x 53 x 23mm (approx)
  2. Regulator voltage: 3.3V
  3. Battery: CR1220 3V


Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 350 / Piece
Get Best Quote
Description:

The Arduino CNC Shield makes it easy to get your CNC projects up and running in a few hours. It uses open source firmware on Arduino to control 4 stepper motors using 4 A4988 Stepper drivers,, with this shield and the Arduino you can build all kinds of robotics or CNC projects including CNC routers,laser cutters and even pick&place machines.

Features

  1. GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals.
  2. 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
  3. 2 x End stops for each axis (6 in total)
  4. Spindle, Coolant enable and direction
  5. Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others)
  6. Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping)
  7. Compact design.
  8. Stepper Motors can be connected with 4 pin molex connectors.
  9. Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)


Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
REQUEST CALLBACK
Approx. Rs 999 / Piece
Get Best Quote
Features:
  • WiFi module is industrial-grade chips ESP8266, which is ESP-12E with metal shield, strong anti-interference ability

  • Shield is pin-compatible with Arduino Uno, Mega2560 and other control board. A voltage converter chip is used to deal with 3.3V (Esp8266) and 5V (Arduino)

  • Dual DIP switches is used for serial ports so that this module shield can be used alone as an Arduino Uno expansion board, and also be used as ESP8266 expansion board

  • Serial data is transported to WiFi device transparently, and vice versa. Arduino program does not need any configuration

  • WebServer is developed to configure WiFi parameters and serial port parameters

  • The module shield can be used as an independent ESP8266 development board. for instance, downloading the official AT commands firmware, NodeMCU open source firmware can be used

  • The module shield also can be used as stand-alone expansion board for Arduino Uno.

Technical Specifications
  • 802.11 b / g / n wireless standards

  • STA / AP modes support

  • TCP / IP protocol stack, One socket

  • Supports standard TCP / UDP Server and Client



Additional Information:
  • Minimum Order Quantity: 1 Piece
Yes! I am Interested
 
X

Download Brochure
Campus Component Pvt. Ltd.

Akhilesh (CEO)
No. 308, 3rd Floor, Akruti Chambers, Near Laxmi Narayan Theater, Swargate
Pune - 411037
Maharashtra, India
Send Email
© Campus Component Pvt. Ltd.. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited